Product List
PLYWOOD
FANCY PLYWOOD

Home > Products > Plywood > Hot Press

 

 

Automatic Hot Press
Model: HP-5’x5’ , 4’x8’ , 5’x10’ , 4’x12’ , 4’x10’

Energy Saving
•The lifting is assisted by pressurized
nitrogen gas to save energy and
faster operation. It will prevent
pumps overheating and overloading.

•The pressure in the nitrogen tank is
controlled by a smart control system.
Pump platform supply and transfer
control motion are decided upon
pressure volume so as to level
operation.

Superior high-speed operation
and high production capacity
patented ....



Smart Control System
•Use touch control panel and PLC control system, professional
and accurately controlled by computer to save lobor.
•It has a database for 48 product sets for pressure, temperature
and time. The operator only needs to select the size and
thickness of the products and the press can operate effective
with proper hot press settings.
•There is a clear warning system. When errors happen, the loud
and clear alarm signal will remind operator to check machine
condition to avoid damage.
Time Saving
•The clamp is covered with rubber to avoid damage to the plates.
•The Pusher & Puller of the clamp are controlled by hydraulic
cylinders and can clamp the plate simultaneously.
The clamp moves toward the center from top and bottom
simultaneously.
•It can clamp the plate more preciously without
damaging the surface. The efficiency is higher with shorter loading
and uploading time.


   
   
 
 
Easy Installation
•For operators’ easy and exact feeding, large rollers are adopted. The distance between input & output conveyor and table lifter is short.
•The input conveyor has a feeding guide to avoid veneer drawn and bended.
•There is pusher on the output conveyor, it will push the veneer straight out. Table lifter has a belt conveyor and can load quickly.


5'X5'-30D-550TON

5'X5'-PLYWOOD FEEDING

4'X12' FOR LVL, WTS TAIWAN

 

Effect
There is a straight pusher. It can operate
with high speed and high production capacity.
•Straight pusher adopts straight front end so that two pushing poles could simultaneously position plywood into exact position.
It can reduce the cycle time of hot press operation.
•"KING JUI WEN" hot press has a puller on the unloader side, and a pusher in loader side. It will avoid product dislocation from the hot press when thin plates are lowered.

 

 
Model Size of Product Size of Platen (mm) Total Pressure Unit Pressure Main Ram Daylight
HP550-55

5'x5'

2.5~30mmT
40X1800x1800mm 550ton 21.4kg/cm² Ø400mm X2pcs 60~90mm
HP500-48

4'x8'

2.5~25mmT
40X1370x2700mm 500ton 16.8kg/cm² Ø375mm X2pcs 60~70mm
HP650-4x10

4'x10'

2.5~25mmT
45X1370x3300mm 650ton 15.2kg/cm² Ø375mm X3pcs 60~100mm
HP-850-5x10

5'x10'

2.5~30mmT
45X1800x3300mm 850ton 16.9kg/cm² Ø500mm X2pcs 60~100mm
HP-1000-5x10

5'x10'

2.5~30mmT
45X1800x3300mm 1000ton 20kg/cm² Ø450mm X3pcs 60~100mm

HP700-4x12-LVL

4'x12'

25~60mmT
50X1400x3900mm 700ton 14.6kg/cm² Ø375mm X3pcs 120~150mm


 
Hot Press (Manual Type)
Model: HP-500-(4’x8’)
•New designed frame, to ensure machine steady and use life.
•Auto temperature-controlled system, acceptheat even.
•With hydraulic system for high speedmovement, saving time and raisingproducing ability.
•The ram use metal FCD-50, hardnessHRC50~60 with high accuracy processing. High tightness avoids oil
leaking lengthen service life, reduces cost of
maintenance. (the ram is made in TAIWAN)
 
金瑞文機電有限公司 KING JUI WEN CO., LTD.鎮盟機械股份有限公司 GERMANE MACHINERY CO., LTD.
No.3, Kuang Ming 3rd Lane. Wei Hsin Rd., Yung An District. Kaohsiung. 828 Taiwan.
TEL:886-7-6915316 FAX:886-7-6915320
E-mail: kjw.germane@msa.hinet.net kmdd@kjw-germane.com