Product List
PLYWOOD
FANCY PLYWOOD

Home > Products > Plywood > Cold Press

 
 


 

3'x6' cold press-300Ton For EIDAI VIETNAM CO., LTD 4'x8'-Cold press-5ooTon For Block board factory, Taiwan 4'x8' Cold press-500Ton For Zedtee plywood, Malaysia

 
5'x5'-500Ton In Russia 4'x12'-Cold Press-700Ton For LVL, WTS Taiwan  
 

 

Cold press (Pre press)

Plywood can be made effectively without trouble from high moisture veneer..

Troubles inside hot press caused by turning of veneer and produced rate of inferior plywood were remarkably decreased and as a result, operation rate of hot press was raised up.

Control by pressure gauge with micro switches, and compresses automatically if pressure will be down from your setting pressure

New designed frame, to ensure machine steady and use life

The ram use metal FCD-50, hardness 50~60 with high accuracy processing. the dense proper high not easy oil leak to lengthen the service life, reduce the cost of maintenance

 

 
Type Size of product Size of platen Total pressure Unit pressure Main Ram Up Ram Daylight Ram stroke
CP-200-48 4'x8 1370x2700mm 200ton 6.7kg/cm² Ø250mm X2pcs Ø80mm X2pcs 1200mm 1200mm
CP-300-36 3'x6' 1100x2100mm 300ton 18.1kg/cm² Ø300mm X2pcs Ø60mm X2pcs 1200mm 900mm
CP-350-55 5'x5' 1800x1800mm 350ton 13.6kg/cm² Ø330mm X2pcs Ø60mm X2pcs 1200mm 900mm
CP-500-55 5'x5' 1800x1800mm 500ton 19.5kg/cm² Ø375mm X2pcs Ø60mm X2pcs 1200mm,
1500mm
900mm
CP-500-48 4'x8' 1370x2700mm 500ton 16.8kg/cm² Ø375mm X2pcs Ø80mm X2pcs 1200mm,
1500mm
900mm
CP-650-4x10 4'x10 1400mmx3300mm 650ton 15.2kg/cm² Ø375mm X3pcs Ø80mm X2pcs 1200mm 900mm
CP-700-5x10 5'x10' 1800mmx3300mm 700ton 13.9kg/cm² Ø375mm X3pcs Ø100mm X2pcs 1200mm,
1500mm
900mm
CP-700-4x12 4'x12' 1400mmx3900mm 700ton 14.6kg/cm² Ø375mm X3pcs Ø100mm X2pcs 1200mm,
1500mm
900mm

Custom machine specifications are available.

 
4 DECKS AUTO COLD PRESS

MODEL:CP4D-500A

It comprises 5 units which are 4 daylights of main engine for cold press,hydraulic auto loader with long stroke,centrai control oil press, central control cabinet for a complete automatic cold press system.

It is designed apecial main engine to fit each daylight for pressing & used strong steel of h shape to adopt the fulcrum of top plate of main engine & frame .It gets united the base of the front & the rear lift table & their smart appearance .Except for oruginal slide gear,it uses the h shape & add leading gear to ensure smooth during weight in working order .

To adapt bottom ram type,each daylight uses small pressing space design which can gradually go on feed plate right away for pressing. It improves the quantity of products in large and the quantity of products indirectly.

It is a fully automatic control by programming controller to feed plate ,pressing of each daylight ,pressing time ,unloading & setting presure..

Ram for oil cylinder uses the special FCD-50 (HARDNESS HRC 50~60) with high accuracy processing which belongs to famous plant inside the country .It is not liable to leak oil out so that it can inside the country .It is not liable to leak oil out so that it can inside the country .It is not liable to leak oil out .

Type Size of product Size of platen Total pressure Unit pressure Main Ram Up Ram Daylight
4CP-500-5x5 5'x5' 1800x1800mm 500ton 19.5kg/cm² Ø375mm X2pcs Ø150mm X1pc 500mm
4CP-500-4x8 4'x8' 1370x2700mm 500ton 16.8kg/cm² Ø375mm X2pcs Ø150mm X1pc 600mm

 

4'X8'-4DECKS AUTO COLD PRESS-500TON
FOR PT.IDEC ABADI, INDONESIA

4'X8'-4DECKS AUTO COLD PRESS-500TON
FOR ZEDTEE PLYWOOD, MALAYSIA

 

   
 

 
金瑞文機電有限公司 KING JUI WEN CO., LTD.鎮盟機械股份有限公司 GERMANE MACHINERY CO., LTD.
No.3, Kuang Ming 3rd Lane. Wei Hsin Rd., Yung An District. Kaohsiung. 828 Taiwan.
TEL:886-7-6915316 FAX:886-7-6915320
E-mail: kjw.germane@msa.hinet.net kmdd@kjw-germane.com